Accessories are Included
|The Water Ozonator is designed to freshly ozonate drinking water. Ozone (O3) is a richer form of oxygen (O2) as it has one more oxygen molecule. Enjoy the fresh taste and health benefits of added oxygen. |
The SOTA Basic The SOTA Basic Wellness Kit includes three SOTA units that provide four-parts for a Wellness Program. Includes:
- 1 Silver Pulser SP7
- 1 Magnetic Pulser MP6
- 1 Water Ozonator WOZ5
The SOTA Premium Wellness Kit The SOTA Premium Wellness Kit includes the five SOTA units:
- 1 Silver Pulser SP7
- 1 Magnetic Pulser MP6
- 1 Water Ozonator WOZ5
- 1 Bio Tuner BT9
- 1 LightWorks LW2
- 1 LightWorks Hand Paddle Set HPLW2
We can all benefit from more oxygen. Oxygen makes us feel more alert. As a result of environmental pollution, there is less oxygen in our air and water today. Ozone, freshly added to drinking water, provides a safe and gentle increase in oxygen.
The Water Ozonator can also be used to sterilize water. As nature’s cleanser, ozone purifies our air, soil, and water. Ozone has become a well-known source for sterilizing water systems and bottled water. Laboratory testing using a SOTA unit to sterilize water, proved several virulent pathogens were killed. The Water Ozonator can be a handy item when traveling or camping as it can be operated from a 12-Volt battery.
Check the laboratory tests for the ability of ozone as produced by a SOTA Water Ozonator to kill virulent pathogens in water.
|Laboratory Tests |
| A glass of drinking water can be freshly ozonated in about three minutes. Use a glass container as glass is ozone resistant. Simply place the airstone in the water and turn the unit on. You will see bubbles forming as the ozone is released into the water. Ozone dissipates quickly into the air, so the water should be consumed within 20 minutes or capped tightly in a thermos or a glass bottle for later use. Drinking freshly ozonated water can readily be used as part of a busy lifestyle. |
The Water Ozonator has a built-in timer for 5 minutes, 15 minutes, 30 minutes and 60 minutes. Select the time required based on the quantity of water.
Precautions should be taken to ensure the unit operates in a well-ventilated area. See Cautions.
For more detailed instructions, watch the following How-to Video or read The SOTA Products User Guide and the Product Manual.
The SOTA Products User Guide
offers tips and suggestions for each of the SOTA Units:
- Just starting out? ... See Recommendations Before You Begin.
- Using more than one Unit? ... You'll find tips to help.
- Wondering how to Integrate the Units for your Wellness? ... There are recommendations for a Basic Wellness Program and a Focused Wellness Program.
- Embracing Wellness? ... You'll find tips for an Ongoing Wellness Program.
Russ demonstrates how to use the Water Ozonator. (length: 11:20)
|Accessories Included |
| ||One (1) Ceramic Airstone with Silicone Tubing || |
| ||One (1) Carrying Case |
| ||One (1) Product Manual |
| ||One (1) Wall Adaptor for International Use |
| || ||We stock Wall Adaptors with prongs for North America, Asia, UK, Europe and Australia. Please specify the type of adaptor required when ordering. |
Sharing your Experience with the SOTA Products helps others.
| ||The Water Ozonator uses an advanced Corona Discharge method to produce ozone. There are two common methods to generate ozone: a) Corona Discharge and b) Ultraviolet Light (UV). The Corona Discharge method produces a more consistent and higher output of ozone compared to the UV light method. Unless the UV light unit is large enough, it is difficult to ozonate water to the required concentrations. The UV method is not as reliable because the UV bulb deteriorates over time. Although, if using very high-powered (>500mg/Hr) methods of generating ozone, ultraviolet is best, as it does not produce oxides of nitrogen (NOx). |
|The SOTA Water Ozonator is not considered a very high-powered unit, therefore it does not produce oxides of nitrogen under normal operating conditions. This was confirmed with laboratory testing by Maxxam Analytics Inc in Edmonton, Alberta, Canada. |
| || The SOTA Water Ozonator has a Fused Quartz Glass ozone chamber. |
| ||Ozone resistant materials have been used. The tubing is silicone which is an ozone resistant material. |
| ||A high-quality ceramic airstone produces small bubbles to ensure good ozone saturation in water. |
| ||Ozone output is commonly rated at mg/hour at a specific litres per minute (LPM) airflow. There are two methods to measure the ozone output: a) Chemical titration, which gives an incorrectly high rating, or b) Ozone-in-Air, which gives the most accurate rating. The SOTA Water Ozonator is rated by the second, more accurate method. It is 200+ mg/hr @ 1.5 LPM airflow. The SOTA unit was tested using a GM Anceros Ozone-in-Air analyzer. |
| ||Water sterilization: The unit has a high enough Oxygen Reduction Potential (ORP) to meet minimum requirements for water sterilization. The SOTA Water Ozonator produces an ORP of over 1,000 mV. The minimum required is 600 mV so this unit exceeds requirements for water sterilization. |
| ||The unit has the option, with the addition of a universal adaptor, to operate from a 12 Volt DC source such as an automobile battery or appropriate solar panel. |
| ||The SOTA Upgrade Program: Purchasing a SOTA product entitles you to upgrade your original model to the newest model - at any time - at a discount of up to 50%. |
|SOTA Upgrade Program |
| ||The SOTA Water Ozonator is covered by a two-year warranty. |
| || The Water Ozonator is CE certified. This is a European standard that indicates an electronic unit conforms to essential safety requirements to operate as a household consumer product. |
| ||The Water Ozonator is also RoHS Compliant. This is a European standard that restricts the use of 6 hazardous materials, including lead, in electronic and electrical equipment. |
| ||As with all electrical products do not use near water, when driving a car or when operating heavy equipment. |
| ||Avoid breathing in the Ozone directly from the airstone as it may irritate lung tissue. Always use in a well ventilated area, such as under a stove top exhaust fan. |
| ||Do not operate the unit without the built-in air pump running. If the air pump is not running, there will be no bubbles coming from the airstone. |
| ||While this technology is generally considered safe, there exists potential for rare individual reactions that cannot reasonably be foreseen. Therefore, your use of the SOTA Products constitutes your agreement that you are responsible for your decision to use the technology. |
| Each unit comes with a manual that explains how to use the unit. Manuals for Earlier Models are available on the Manuals & Videos page. |
|Current Model |
|Manuals & Videos |
|Power Requirements |
|Wall Adaptor |
| ||12 Volts DC @ 1.5 Amps, Centre POSITIVE |
| ||Caution: Exceeding the voltage rating or reverse connection may result in injury or unit failure. This will void the warranty. |
|Generator Output with Ambient Air input |
| ||Greater than 200 mg/Hr O3 @ 1.5 LPM using an Ozone-in-Air Anseros Ozone Analyzer Model Ozomat Anseros GM 6000-RT. Ozone concentration is 3.6 Gamma (mg/l or ug/ml) @ 0.5 LPM. |
| || Capacity: Fully saturates 1 cup (8 ounces or 250 ml) of chilled filtered water in 2 to 5 minutes, depending on the water, to an ORP (Oxidation Reduction Potential) of over 1,000 mV. |
| ||Ozone Generator Construction: Uses a Fused Quartz Crystal and High Grade Stainless-Steel ozone chamber. Under normal use, the ozone chamber should last several years. |
| ||The Water Ozonator uses ambient air and is not intended for use with pure oxygen. |
| ||Integral Air Pump Output: 0.5 PSI pressure, 2 LPM (2000 cc/min) volume. |
| || Optional Power Input: To operate the ozone generator from a 12 Volt DC source such as an automobile battery, or appropriate solar panel, purchase a Universal Power Cord with POSITIVE tip. |
| If you experience a problem with the Water Ozonator, please check our troubleshooting guide. Most problems can be cleared using this guide. |
|Troubleshooting Guide |
| The manufacturing of the SOTA Products are a global collaboration. The following countries participate in the making of the Water Ozonator (listed in alphabetical order): Canada, China, Hong Kong, Malaysia, Spain, Taiwan, Thailand and the USA. Our units say Made in China because China is the last step in the assembly of the units. |
We are grateful that the people in all of these countries help us to produce quality products at reasonable prices for our customers. The Water Ozonator is covered by a 2-year parts and labor warranty on all internally mounted components. Please note warranty is void if the failure is due to abuse, negligence, or if pure oxygen is used.
A common comparison when comparing the Water Ozonator to other ozone generators is to compare how the ozone itself is produced. There are three common methods used to make ozone: Ultraviolet (UV) Light, Cold Plasma and Corona Discharge. The SOTA Water Ozonator uses Corona Discharge.